Supplier Spotlight

Video Exclusives

Fiat Chrysler electrifies the Ram 1500 truck

gtr

Unveiled at the 2018 Detroit auto show, the 2019 Ram 1500 has shed 100kg and added e-torque power. Available with a 5.7-liter Hemi V8 or a second-generation 3.6-liter Pentastar V6 engine, the 1500 uses mild-hybrid capability to recapture energy during deceleration to enable start/stop function as well as short-duration torque addition.


Mercedes-Benz unveils its revamped G-Class

gtr

The all-new G-Class makes its public debut at the Detroit auto show in the USA this month in G550 form. Completely redeveloped and fitted with a 4.0-liter V8 biturbo gasoline engine offering 427ps and 450 lb-ft of torque at 2,000rpm to 4,750rpm, despite near-identical looks to its predecessor plenty has changed for the Mercedes-Benz SUV.


Click here/on image to watch video

In light of Fisker's solid-state battery breakthrough and claims of a one minute charge time, will this electric vehicle technology development kick-start mass BEV uptake? 

News

Continental introduces the Active Purge Pump (APP)

Continental has unveiled details of its new Active Purge Pump (APP) technology, which the Tier One supplier is championing as a 'new solution to meet stricter hydrocarbon evaporation legislation around the globe'.  

As modern gasoline cars use a canister filled with activated carbon to collect all petrol fumes from the fuel tank. The canister, with the cumulated hydrocarbon (HC), needs to be flushed or purged from time to time. The air content, rich in HC, is fed forward to the intake manifold and flows into the combustion chambers where it gets burnt. This system has greatly reduced evaporative HC emissions.

However, two challenges begin to threaten this success story: Firstly, the legislation on evaporative HC emission is set to become much stricter around the world over the next four to five years. Secondly, purging the HC canister is currently done by using the vacuum that is generated in the intake manifold of a gasoline engine during part-load operation by so-called throttling. In highly efficient gasoline cars there is less or no vacuum available, though, because throttling is inefficient and is avoided wherever possible. In a gasoline mild hybrid car the engine may not be running at up to 20% of the driving time, so no vacuum either.

"Continental has developed an electrified solution to further reduce HC evaporative emissions", said Klaus Hau, head of the Business Unit Sensors & Actuators in the Continental Division Powertrain. "For the first time the Active Purge Pump makes canister purging available independent from engine operation point and vacuum availability. With the Active Purge Pump vehicle manufacturers will be in a much better position to meet oncoming HC emission legislation."

 

As the efficiency of modern gasoline cars is partly based on running the engine in the most efficient part of its map whenever possible – or not to run it all, for instance, in a hybrid car. Throttling in particular is avoided as the engine’s thermodynamic efficiency is reduced.

"The need for higher engine efficiency is beginning to make vacuum a rarity in gasoline cars. As a result it is becoming more difficult to flush the HC canister because often the boundary conditions will not allow this," added Stefan Grüneis, product manager for Continental exhaust and emissions actuators.

The Active Purge Pump (APP) is not dependent on vacuum. Instead it actively pulls the HC-laden air from the canister. The pump used for this action is a very compact and light-weight radial pump, driven by a highly efficient brushless DC motor.

"The biggest benefit of the APP is that we can use it on demand, and activate it any time when it is necessary", said Grüneis. “This makes the APP a perfect match for turbocharged engines which are run at higher loads more often, de-throttled engines, start-stop and hybrid powertrains with long engine-off periods.”

Then again, actively purging the canister is only the core function of the new solution. Additional software modules and some additional hardware (like valves) will make further functions available. Among these are a high-performance leak detection and a measurement of the HC content in the purged air.

"Additional functions like these make the pump the core of an Active Purge System (APS). For instance, determining the HC concentration in the purge air is needed to adapt the amount of fuel injection during part load or idling", Grüneis explained.

Tank leak detection, on the other hand, is currently a stand-alone system which has to be integrated separately. Making this part of an Active Purge System built around the existing Active Purge Pump is more efficient. To support the trend to higher system integration levels, the required APP and APS functional content can be flexibly combined from hardware and software components.

18 August 2017


RECEIVE THE
LATEST NEWS


Your email address:





Read Latest Issue
International Engine of the Year Awards
Read Latest Issue

Web Exclusive Articles

Volvo details its first climate-neutral facility
Swedish OEM Volvo has highlighted its commitment to reducing the environmental damage caused by vehicle manufacturing as the Skövde engine production site in Sweden becomes the company’s first climate-neutral plant
Read Now

Hyundai 2019 Veloster N: The Knowledge
Designed specifically for the US market and officially unveiled at the 2018 Detroit auto show this month, Hyundai’s 2.0-liter turbocharged Veloster N has been developed to deliver driveability rather than outright performance statistics.
Read Now

Renault Trucks reveals how mixed reality can improve engine quality control
Renault Trucks, in collaboration with Immersion, is evaluating the potential of mixed reality to deliver a new, faster and more reliable quality control process at its Lyon engine manufacturing site.
Read Now

Read Latest Issue

Supplier Spotlight

Supplier SpotlightClick here for listings and information on leading suppliers covering all aspects of the engine technology industry. Want to see your company included? Contact aboobaker.tayub@ukimediaevents.com for more details.

Submit your industry opinion

Industry BlogDo you have an opinion you'd like to share with the engine technology community? We'd like to hear your views and opinions on the leading issues shaping the industry. Share your comments by sending up to 500 words to d.slavnich@ukimediaevents.com

Submit Your Recruitment Ad

Recruitment AdTo send us your recruitment advertising or to receive information on placing a banner please email aboobaker.tayub@ukimediaevents.com