Supplier Spotlight

Video Exclusives

Mercedes-Benz unveils its revamped G-Class

gtr

The all-new G-Class makes its public debut at the Detroit auto show in G550 form. Completely redeveloped and fitted with a 4.0-liter V8 biturbo gasoline engine offering 427ps and 450 lb-ft of torque at 2,000rpm to 4,750rpm, despite near-identical looks to its predecessor plenty has changed for the Mercedes-Benz SUV.


Ford’s F150 pickup gets its first diesel motor

gtr

Developed by the powertrain team behind the 6.7-liter Power Stroke engine for super duty trucks, the all-new 3.0-liter V6 Power Stroke unit promises 250ps, 440 lb-ft of torque, and an anticipated 5175kg of towing capacity.


Click here/on image to watch video

In light of Fisker's solid-state battery breakthrough and claims of a one minute charge time, will this electric vehicle technology development kick-start mass BEV uptake? 

News

Automakers test GKN’s hybrid and AWD technology in Arctic conditions

GKN has demonstrated a range of new hybrid all-wheel drive (AWD), AWD Disconnect and torque vectoring technologies that will make future cars more intelligent, efficient and enjoyable to drive. Representatives from a range of automakers have test driven a range of innovative drivetrain concepts at the driveline expert’s Wintertest proving ground in Arjeplog, Sweden.

“By 2025, driven by GKN advances, AWD will be the driveline of choice for many drivers and premium cars,” says Rob Rickell, president of group technology at GKN. “There has already been a major shift in the market and the public’s perception of AWD. Demand is growing strongly for AWD models based on front-wheel drive platforms – and automakers see that AWD makes hybrids and plug-ins a much more attractive proposition for consumers.”

Demand for AWD in the smaller cars of the B- and C-segments is growing steadily, particularly in markets such as China where the bestselling top-of-the-range models are often AWD. With a new generation of more fuel-efficient AWD systems now in production, drivers are enjoying the extra grip, stability and performance.

GKN pioneered the introduction of torque vectoring technology and AWD Disconnect systems and has invested in the development of hybrid AWD technologies. AWD Disconnect systems respond to driver inputs and road conditions to seamlessly switch between AWD and two-wheel drive modes, actively disconnecting components such as the propshaft and rear axle to reduce friction losses and improve fuel consumption.

GKN is the only Tier 1 supplier that can produce a complete AWD system in-house, as well as the electronics and software engineering. The company is now working with a number of vehicle manufacturers on AWD hybrids that use GKN’s innovative eAxle technology. Porsche recently awarded GKN Technology Partner Status for its successful completion of the work on the 918 Spyder plug-in hybrid supercar.


 

At Arjeplog, representatives from automakers experienced the latest applications for GKN driveline technologies, as well as a number of prototype systems. The low-friction ice test tracks produce on-the-limit conditions, making it easier for test drivers to access the AWD system’s full performance.

As GKN Driveline’s vice president of AWD Product Technology, Rob Genway-Haden, explains: “In back-to-back comparisons, almost everybody prefers AWD to front-wheel drive. Not everybody realises that with our latest generation of intelligent AWD systems, the difference in fuel efficiency can be around just 3%. By adding our AWD Disconnect, this can be minimized even further. Around 80% of the losses in an AWD system are frictional losses and so when you disconnect the rear axle, you remove a lot of the losses. There was particular interest in our AWD Disconnect system for A-segment platforms as it is the only scalable solution available to automakers.”

Feedback from test drives of GKN’s eAxle systems was overwhelmingly positive. A plug-in hybrid with a GKN eAxle can improve fuel economy by 30-50% at the same time as boosting performance. GKN has already supported a number of ground-breaking and commercially successful eAWD programmes, including the Mitsubishi Outlander, Porsche 918 Spyder and BMW i8.

“By adding AWD, hybrids become an even more appealing proposition to drivers,” adds GKN Driveline's vice president of Product Technology, eDrive systems, Theo Gassmann. “Automakers see GKN’s eAxles as a way of hybridizing FWD platforms in a way that adds more value for customers. On RWD platforms, they can enable engineers to achieve remarkable things with the power distribution and dynamics.”

Among the vehicles tested and demonstrated during GKN Driveline’s 2015 Wintertest programme are the Range Rover Evoque with standard and Active Drivelines, the BMW i8 with GKN’s two-speed eAxle, the Jeep Renegade with GKN’s AWD Disconnect system for compact SUVs, and the BMW X6 with GKN’s electronic torque vectoring system. A number of development vehicles used in research programmes for automakers were also demonstrated.

 

March 12, 2015

12 March 2015


RECEIVE THE
LATEST NEWS


Your email address:





Read Latest Issue
International Engine of the Year Awards
Read Latest Issue

Web Exclusive Articles

Hyundai 2019 Veloster N: The Knowledge
Designed specifically for the US market and officially unveiled at the 2018 Detroit auto show this month, Hyundai’s 2.0-liter turbocharged Veloster N has been developed to deliver driveability rather than outright performance statistics.
Read Now

Renault Trucks reveals how mixed reality can improve engine quality control
Renault Trucks, in collaboration with Immersion, is evaluating the potential of mixed reality to deliver a new, faster and more reliable quality control process at its Lyon engine manufacturing site.
Read Now

BAIC Motor on the industry’s fuel economy performance ambitions
BAIC has teamed up with Siemens to implement vehicle energy management and model-based systems engineering as the Chinese OEM works towards optimal fuel efficiency
Read Now

Read Latest Issue

Supplier Spotlight

Supplier SpotlightClick here for listings and information on leading suppliers covering all aspects of the engine technology industry. Want to see your company included? Contact aboobaker.tayub@ukimediaevents.com for more details.

Submit your industry opinion

Industry BlogDo you have an opinion you'd like to share with the engine technology community? We'd like to hear your views and opinions on the leading issues shaping the industry. Share your comments by sending up to 500 words to d.slavnich@ukimediaevents.com

Submit Your Recruitment Ad

Recruitment AdTo send us your recruitment advertising or to receive information on placing a banner please email aboobaker.tayub@ukimediaevents.com